上一個
下一個
產品中心 Products Center
搜索
全部分類
1/1
瀏覽量:
1000
571240 FUELPOWER SOOT REMOVER 25 KG
瀏覽量:
1000
產品編號
650-571240
數量
-
+
1
產品描述
Product information
If deposits are allowed to form on heat exchangers, the loss of efficiency can be directly related to extra fuel consumption. A 1 mm deposit is approximately equivalent to a 10% efficiency loss, a 3 mm deposit can reduce efficiency by up to 50%. The normal ignition temperature of soot is around 600°C. This means that it is burned only in the hottest parts of the boiler or diesel exhaust systems. Due to the catalytic action of Unitor FuelPower Soot Remover, the ignition temperature of the soot/deposit is reduced to less than 280°C. The carbon deposits are thus ignited, leaving an easily removed ash.
The use of Unitor FuelPower Soot Remover not only provides greater fuel efficiency, but also prevents acid formation in areas where severe corrosion could result in expensive damage, i.e. heat exchangers, superheaters, economisers, exhaust paths/stacks.
Features
- Reduces soot and slag deposits
- Reduces cold-end corrosion
- Assists soot blowing
Benefits
- Saves you money by improving heat transfer
- Saves you money by increasing boiler efficiency
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Physical properties
| Appearance | Blue green |
|---|---|
| Density [kg/dm3] | 1,2 - 1,4 |
| Flash Point [°C] | Not applicable |
| Form | Dry powder |
Technical data
| Not Compatible | If moist, may attack mild steel, iron and aluminium |
|---|
Directions for use
Dosage and control
FuelPower Soot Remover should be introduced to the boiler through a suitable port, preferably with a blower, ensuring that the powder is spread through the flame path towards the back of the combustion chamber. For Diesel engines, inject FuelPower Soot Remover directly into the exhaust system upstream of the area to be treated. FuelPower Soot Remover is preferably dosed using Unitor's Fixed Injector, product No. 664 572073 and/or Portable Injector, product No. 664 572065.
|
Steam Raised (tons/hr) |
Boiler fuel (tons/day) |
Dose rate (kg/day) |
|---|---|---|
|
Boiler |
||
|
3 |
5.5 |
1.0 |
|
6 |
11 |
2.0 |
|
9 |
16 |
3.0 |
|
12 |
21 |
3.5 |
|
15 |
27 |
4.0 |
|
23 |
41 |
4.5 |
|
31 |
55 |
5.0 |
|
46 |
82 |
5.5 |
|
62 |
110 |
6.5 |
|
Fuel Consumption (Tons/Day) |
Dose Rate (Kg/Day) |
|---|---|
|
Diesel Engines |
|
|
10 |
1.5 |
|
20 |
3.0 |
|
30 |
3.5 |
|
40 |
4.0 |
|
50 |
4.5 |
產品特性
• 減少煙灰和爐渣沉積物
• 減少冷端腐蝕
• 協助吹灰
優勢
• 通過改善傳熱來節省資金
• 通過提高鍋爐效率為您節省資金
如果允許沉積物在熱交換器上形成 ，則效率的損失可能與額外的燃料消耗有關 。1毫米的沉積物大約相當於10％的效率損失 ，3毫米的沉積物可以將效率降低多達50％ 。煙灰的正常著火溫度約為600℃ 。這意味著它僅在鍋爐或柴油機排氣係統的最熱部分燃燒 。由於Unitor FuelPower Soot Remover的催化作用 ，煙灰/沉積物的點火溫度降至低於280°C 。
因此 ，碳沉積物被點燃 ，留下容易除去的灰分 。Unitor FuelPower Soot Remover的使用不僅提供了更高的燃料效率 ，而且還防止了在嚴重腐蝕可能導致昂貴損壞的區域（即熱交換器 ，過熱器 ，節能器 ，排氣路徑/煙囪）中的酸形成。
訂購信息
Product number Product name
571240 FUELPOWER SOOT REMOVER 25 KG
配件
Product number Product name
572073 FIXED INJECTOR
572065 PORTABLE SOOT INJECTOR
使用說明
劑量和控製
應通過合適的端口引入鍋爐 ，最好使用鼓風機 ，確保粉末通過火焰路徑朝向燃燒室後部 。
對於柴油發動機 ，將FuelPower Soot Remover注入到待處理區域上遊的排氣係統中 。FuelPower Soot Remover優選使用Unitor的固定注射器 ，產品號664572073和/或便攜式注射器 ，產品號664 572065給藥 。.
Steam Raised (tons/hr) Boiler fuel (tons/day) Dose rate (kg/day)
Boiler
3 5.5 1.0
6 11 2.0
9 16 3.0
12 21 3.5
15 27 4.0
23 41 4.5
31 55 5.0
46 82 5.5
62 110 6.5
使用說明2
Fuel Consumption (Tons/Day) Dose Rate (Kg/Day)
10 1.5
20 3.0
30 3.5
40 4.0
50 4.5
260
版權所有 ：江蘇亞美國際貿易有限公司 備案號 ：蘇ICP備17042192號-1 網站建設 ：