上一個
下一個
產品中心 Products Center
搜索
全部分類
1/1
瀏覽量:
1000
777701 BWT LIQUID PLUS 25 LTR
瀏覽量:
1000
產品編號
655-777701
數量
-
+
1
產品描述
Product information
This product supersedes product no: 571265
Features
- Minimises scale formulation, corrosion and sludge accumulation
- Simple to Control
- Effective iron dispersant
Benefits
- Maintains sludge in a non-adherent state for removal by blow down
- Simple test to determine level of treatment
- Can be used for boilers of all pressures
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-9 |
|---|
Physical properties
| Density [g/ml] | 1.45 - 1.47 |
|---|---|
| Form | Liquid |
| Freezing Point [°C] | <-20 |
| Materials compatibility | Polypropylene, PVC, Polyethylene, Nylon, Stainless Steel, Viton, Buna –N, Neoprene, Butyl Rubber, Nitrile Rubber, CAF, PTFE |
| pH | 14 |
Technical data
| Not Compatible | Aluminium, Brass, Copper, Zinc, Light Alloys, Natural Rubber |
|---|
Directions for use
Dosing Method
NALFLEET™ BWT Liquid Plus is best applied neat or diluted with condensate or evaporated water to any convenient strength and applied on a continuous basis using a suitable chemical dosing pump.
Sampling and Testing
Control is by simple boiler water tests for alkalinity.
Dosing and Control
The dosage rate of NALFLEET™ BWT Liquid Plus sufficient to produce a P alkalinity in the boiler water of 100ppm is 0.4 liters/1,000 liters of water. NALFLEET™ BWT Liquid Plus is strongly alkaline. Tanks and feeding equipment should be constructed of suitably resistant material such as polypropylene, PVC, polyethylene, mild steel, cast iron or stainless steel. Avoid the use of brass or light alloys.
產品特性
• 最大限度地減少水垢形狀 ，腐蝕和汙泥堆積
• 易於控製
• 符合FDA規定蒸汽可以接觸食物的規定
• 有效的鐵分散劑
優勢
• 保持汙泥處於非粘附狀態 ，以便通過吹掃除去
• 簡單測試以確定治療水平
• 可用於所有壓力的鍋爐
Product Number Product name
777701 BWT LIQUID PLUS 25 LTR
使用說明
加藥方法
NALFLEET™ BWT Liquid Plus 最好用純淨水或用冷凝水或蒸發水稀釋至任何方便的強度 ，並使用合適的化學計量泵連續施用 。
采樣和測試
控製是通過簡單的鍋爐水測試堿度 。
劑量和控製
NALFLEET™ BWT Liquid Plus的劑量率足以在鍋爐水中產生P堿度
100ppm是0.4升/ 1,000升水 。NALFLEET™BWT Liquid Plus具有強堿性 。儲罐和喂料設備應采用適當的耐腐蝕材料製成 ，如聚丙烯 ，PVC，聚乙烯 ，低碳鋼 ，鑄鐵或不鏽鋼 。避免使用黃銅或輕合金 。
下一個
無
版權所有 ：江蘇亞美國際貿易有限公司 備案號 ：蘇ICP備17042192號-1 網站建設 ：